Bidet Outlets Added Beside the Toilet in 3 Bathrooms in Vancouver, WA
A returning customer in Vancouver wanted bidet seats in three bathrooms, but there was no outlet near any of the toilets. We ran two new 20-amp circuits, added a third outlet off one of them, and put a GFCI outlet beside each toilet.
Bathrooms
3
New Circuits
2 x 20-amp
Outlets
3 GFCI
On Site
About 4 hours
Scope of Work
- Ran two new 20-amp circuits for the bidet outlets
- Added a third bidet outlet off one of the new circuits
- Put in an Eaton tandem 20-amp breaker to make room in the panel
- Put a GFCI outlet beside the toilet in all three bathrooms
- Cut the boxes in clean so only a cover plate shows
A returning customer in Vancouver wanted electric bidet seats in three bathrooms. None of the toilets had an outlet near it, so we added one beside each toilet, on new circuits, in about four hours.
Why a bidet needs its own outlet
An electric bidet seat plugs into a normal 120-volt outlet, but it has to be close and low beside the toilet. Running an extension cord across a wet floor isn’t safe, and most bathrooms don’t have an outlet there. Code also requires GFCI protection on bathroom outlets (NEC 210.8), so every new one is a GFCI. Our post on GFCI and AFCI protection explains the difference.
How we wired it
- Two new 20-amp circuits. We added the third outlet off one of them.
- A tandem breaker. The panel was short on spaces, so we put in an Eaton 20-amp tandem breaker to fit the new circuits.
- Clean cut-ins. We cut each box in low beside the toilet and fished the wire through the wall. When we were done, the only thing that shows is the outlet and its cover.
Adding outlets is one of the quicker jobs we do. See our bathroom electrical work page, call 360-828-7143, or tell us how many bathrooms need one.
Real Reviews
What customers say about our bathroom work
I called this place to ask some questions and the customer service was amazing! I felt like they had the perfect answers to my questions and was just an overall great information on what I needed!
Garrett worked on our building recently and did an outstanding job. He was very professional and friendly. Thanks for all the fabulous work, Garrett! I will definitely recommend you to others for electrical work.
Project Photos
More From This Job
Learn more about this service
Bathroom Electrical
Full service details, pricing ranges, and what's involved in a typical bathroom job.
View service pageServing Vancouver
Electrician in Vancouver, WA
Our full service page for Vancouver: homes served, permit jurisdiction, and local electrical context.
View Vancouver pageMore Real Projects
Related Jobs Nearby
Other bathroom work and recent projects across Clark and Cowlitz County.

Primary Bathroom Remodel Rough-In in Camas, WA
A full day of rough-in for a primary bathroom remodel in Camas. We set the boxes for three vanity sconces, a towel warmer, a speaker, toe-kick lights on a motion sensor and two new exhaust fans, and moved the heated floor thermostat.

Three Vanity Lights and Two Bidet Outlets in Ridgefield, WA
We hung new vanity lights in three bathrooms of a Ridgefield home. In two of them, we added an outlet behind the toilet for a bidet seat, right where the cord reaches.

Two-Bath and Bedroom Remodel Trim in Felida, Vancouver, WA
We did the trim-out on a two-phase remodel in Felida. We put 6-inch cans in two new bathrooms and a bedroom, put in two Panasonic WhisperFan exhaust fans, hung the vanity lights, and landed AFCI and GFCI breakers at the panel.
Planning a similar project?
Newman Electric serves Vancouver and the rest of Clark and Cowlitz County, WA. Free estimates on every job.