100-Amp to 200-Amp Service Upgrade in Vancouver, WA
This Vancouver house was still on 100-amp service with a crowded old panel. We put a 200-amp Siemens meter main on the outside wall, swapped the inside panel for a new 200-amp Siemens, redid the grounding and bonding, and added whole-house surge protection.
Service
100A to 200A
Outside
Siemens meter main
Added
Whole-house surge protector
On Site
About 9.5 hours
Scope of Work
- Set up a 10 a.m. disconnect with Clark Public Utilities and pulled the permit
- Put a 200-amp Siemens meter main on the outside wall
- Pulled the old 100-amp panel and put in a new 200-amp Siemens panel
- Redid the grounding and bonding for the whole house
- Added a whole-house surge protector
- Ran new conduit through the utility room
This Vancouver house was still on 100-amp service. The panel inside was packed full, and there was no room left to add anything. We upgraded it to 200 amps in one day: a new meter main outside, a new panel inside, new grounding, and surge protection.
Why go to 200 amps
A 100-amp service was normal when a lot of Vancouver houses were built. It gets tight once you add a heat pump, an EV charger, a hot tub or a bigger kitchen. When every space in the panel is used and the main is undersized, a 200-amp service upgrade is usually the fix. Our post on the signs a panel is due for replacement covers what to watch for.
What we put in
- A 200-amp Siemens meter main outside. The meter and the main breaker sit in one weatherproof box on the outside wall. That main breaker is also the outside emergency shutoff the 2023 NEC requires on new services (NEC 230.85).
- A new 200-amp Siemens panel inside. We pulled the old panel, set the new one in the same opening, and moved every circuit over.
- New grounding and bonding. We redid the grounding for the whole system so it meets current code.
- A whole-house surge protector in the new panel. See what a whole-home surge protector actually does.
Swap day
Clark Public Utilities cut the power at 10 in the morning. We pulled the permit ahead of time and were on site about nine and a half hours, finishing after dark. We ran new conduit through the utility room and spliced the old circuits over to the new panel. The house was back on power before we left.
Our post on what a 200-amp upgrade costs breaks down the price. If your house is still on 100 amps, call 360-828-7143 or get your 100-amp service priced.
Real Reviews
What customers say about our panel upgrade work
These guys were amazing. Came in and really knew what they were doing. Super friendly. Looked super nice when they were done.
These guys are top notch. I gave them a call when every other electrical contractor told me they were weeks out, Ryan and the guys came out and upgraded my panel the next day. I highly recommend Newman Electric they are setting the new standard for electrical companies in our area!
Project Photos
More From This Job
Learn more about this service
Electrical Panel Upgrade
Full service details, pricing ranges, and what's involved in a typical panel upgrade job.
View service pageServing Vancouver
Electrician in Vancouver, WA
Our full service page for Vancouver: homes served, permit jurisdiction, and local electrical context.
View Vancouver pageMore Real Projects
Related Jobs Nearby
Other panel upgrade work and recent projects across Clark and Cowlitz County.

200-Amp Outdoor Meter Main and RV Circuit in Carson, WA
We put a 200-amp meter main with an outside disconnect on the block wall of this Carson house and fed the existing basement panel from it. We redid the grounding and bonding, added surge protection, cleared out old dead wiring, and ran a 50-amp RV circuit to a new post.

Laundry-Closet Panel Moved Outside to a 200-Amp Meter Main in Vancouver, WA
The old panel in this Vancouver home was inside a laundry closet. We took it out and put a 200-amp Siemens meter main on the outside wall, with a new mast, new grounding, whole-house surge protection, and every circuit extended out to it.

200-Amp Service Relocation and Panel Replacement in Ridgefield, WA
We moved the overhead service on a rural Ridgefield home to the southwest corner, on a new 200-amp meter main with an emergency disconnect. We also replaced the old paint-covered 100-amp basement panel and re-landed every circuit.
Planning a similar project?
Newman Electric serves Vancouver and the rest of Clark and Cowlitz County, WA. Free estimates on every job.